Connect Devices
OX-Spot and the beacon are added in the app and clearly organized by name.
Alert. Exactly when it's needed.
OX-Spot Control automatically activates warning projections when forklifts and automated guided vehicles approach.
No constant lighting. No habituation. Maximum attention precisely at the critical moment.
Request a consultation now
Challenge
A warning light that stays on constantly will eventually be overlooked.
- The habituation effect.
A light that’s always on gets ignored. After just a few days, no one looks at it anymore—the warning loses its effectiveness, precisely when it’s needed most. - Rigid marking.
Adhesive tape sticks firmly. If the route changes, the tape must be reapplied or holes drilled—every adjustment is a small project in itself. - Forklifts cross paths, but no one is warned in time?
At intersections between production and logistics areas, vehicles, AGVs, and people frequently encounter one another. Without automated warning signals, hazards go unnoticed until it’s almost too late.
A warning is only effective if it stands out. Constant lighting achieves the opposite of drawing attention.
Request a consultation nowThe Solution: OX-SPOT CONTROL
OX-Spot Control expands OX-Spot with intelligent presence control.
To do this, a compact OX-Beacon is mounted on the forklift or tugger train. It continuously transmits a radio signal that is received by OX-Spot Control. When the vehicle approaches the defined area, OX-Spot Control determines the distance based on the signal strength (RSSI) and automatically activates the warning projection. When the vehicle leaves the zone, the projection turns off after a brief delay.
The result: maximum attention, lower energy consumption, and warnings delivered exactly when they’re needed.
Request a consultation now
Here's how OX-Spot Control works:
YOUR BENEFITS AT A GLANCE
OX-Spot Control adds intelligent activation to existing warning projections. The retrofit requires no modifications to vehicles or existing infrastructure and is ideal for gradually expanding existing OX-Spot installations.
A warning effect that doesn't become numbing.
Flashes when approached instead of a steady light—the marking remains effective.
Up to 92% less energy per spot.
The spotlight only turns on when it's needed.
No electrician or IT expertise required.
Plug it in, attach the beacon, set the radius using the app—ready to go in minutes.
Can be used completely offline.
No Wi-Fi, no cloud requirement, no system integration.
GDPR-compliant from the ground up.
Anonymous, one-time signals with no personal identifiers; no movement profiles.
A safe investment.
Start offline today, connect via the cloud later—without any new hardware.
Easy setup via the OX app
Can be used as a standalone device
...and ready to use right away
The App for OX-Spot Control
OX-Spot and the beacon are connected in the app. You then define the distance at which the warning projection is activated and how long it remains visible after the vehicle leaves the detection zone.
Configure Parameters
The activation radius and switch-off delay are configured to suit the specific application.
Automatic Warning
In presence mode, OX-Spot detects nearby beacons and activates the projection automatically.
The Result: The warning appears only when a vehicle approaches and switches off again after the configured delay.
Measurable efficiency in no time
up to −92%
{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Power consumption per spot — Presence-controlled switching instead of continuous operation."}]}]}
≈ 990 €
Savings per year (15 spots) — Electricity cost savings only, excluding the effect of LED lifespan.
in minutes
Ready to use — Plug in the Spot, attach the Beacon, and set the radius via the app.
up to 3 years
Beacon Battery Life — No wiring, no frequent battery replacements.
OX-Spot and OX-Spot Control Compared
While OX-Spot provides a continuously visible projection, OX-Spot Control activates the warning symbol only when someone approaches.
Feature
OX-Spot
OX-Spot Control
Feature
Behavior
OX-Spot
Continuously illuminated
OX-Spot Control
Illuminates only when someone approaches
Feature
Effect
OX-Spot
Continuous projection for consistent visual guidance
OX-Spot Control
Targeted illumination increases awareness exactly when needed
Feature
Energy Consumption
OX-Spot
Operates continuously throughout its runtime
OX-Spot Control
Activates only when required, maximizing energy efficiency
Looking for a permanent projection?
If warnings, notices, or directions need to be permanently visible, OX-Spot is the right solution—without any automatic controls.
Learn more about OX-SpotFAQ
OX-Spot is the projector that permanently projects warning and directional signs onto the ground. OX-Spot Control is the add-on (“Digital Control Option”): It supplements the Spot with a wireless switching power supply that turns the projection on and off based on presence detection as soon as a vehicle tagged with an OX-Beacon approaches or moves away.
No. The system communicates exclusively via Bluetooth LE between the Beacon and the Spot and operates entirely offline. Neither Wi-Fi nor a cloud connection is required for operation.
Plug in the Spot, attach the Beacon to the vehicle, and set the radius and tracking duration using the OX app—usually a matter of minutes per location.
The sensor responds to any OX beacon within the set radius.
No. The signal is anonymous and one-way; it is not linked to any specific person or driver. The trigger time, frequency, or which beacon triggered the signal are not stored—there is no technical provision for tracking the movement or performance profiles of individual employees. In offline mode, there is no network, Wi-Fi, or Internet connection, and therefore no processing subject to the GDPR takes place.
No problem: OX-Spot Control runs independently right from the start, but can be connected to the ORGATEX Cloud at any time without requiring new hardware. This provides additional features such as remote maintenance, OTA updates, and a fleet overview.